db Hard Parts LLC
12727 67th Ave NE
Arlington WA 98223
This is an asymmetrical connection rod designed to strengthen the beam section to resist fatigue caused by detonation. It is cut from a 7000 series aluminum and shotpeened for increased fatigue life. The threads are drilled, reamed, and rolformed. All threaded holes are 100% inspected to conform to the Machinist Standards Manual for class 3 threads and exceeds 75% thread. The bolts are supplied from A-1 Technologies.
Rods are built to customers specified length in either 1.094 or 1.156 pin diameter and either 1.35 or 1.60 pin end width. Both lightened and solid beam are available.